Manual heat transfer machine/heat press large/heat transfer with CE 60*90

Manual heat transfer machine 1.CE certification 2.One year warranty 3.Manufacturer 4Euroupe design,original design

           High pressure heat press machine/heat press large/heat transfer with CE 60*90

High pressure heat press machine

1.CE certification2.One year warranty3.Manufacturer4.Euroupe design,good quality with competitive price

    Guangzhou Brisense M&E Equipment  Co.,Ltd.is the unique manufacturer of ROSA heat press machine.On the market,there are many factories imitate our products,but the quality cann't meet our requirement.You can have a trial oder,the fact will prove it.  

Product Specification

Model	Printing size(CM)	Power(KW)	Tempreture range  (°c)	Time range(S)	Packing(CM)	Voltage(V)	G.W/N.W(KG)	Packing size(cm)
RS-3838	38*38	1.8	0-220	0-999	carton and EPE foam	110/220	26/24	82*46*48
RS-3845	38*45	1.8	0-220	0-999	carton and EPE foam	110/220	30/28	82*46*48
RS-4060	40*60	2.5	0-220	0-999	carton and EPE foam	110/220	37/35	82*66*48
RS-6080	60*80	5.0	0-220	0-999	carton and EPE foam	110/220	110/100	110*110*60
RS-6090	60*90	6.0	0-220	0-999	carton and EPE foam	110/220	116/110	120*110*60

Product Feture

1.Unique structure,reasonable design,max opening degree is 70°,it is very easy to operate.

2.Use the digital display tempreture control system,the tempreture's error exactly is ±1°.

3.Pre-adjust the pressure,change th pressure freely.

4.Perfect air spring return,easy to use and safe.

5.CE certification,single-LED display integrated automatic electronic timing,it will automaticly warns after finishing the process.

6.Use the good heat aluminum plate,electronic tube and heat plate are casting as one makes the heat    uniform and durable.

7.Telfon coated on the surface of heat aluminum plate,it is very convinient to clean.

8.With high tempreture elastic silicone pad to keep it not deform when it gets 400 degrees.

Specific Operating

1.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the protecting ground wire)

2.Adjust the needed tempreture(actually 180-200°) and time(actually 40-45s)

 Tempreture sets up:press the push botton of SET one time,it shows SP station,then press + or - to set the needed tempreture,finish the adjusting tempreture

 Time sets up:press the push botton of SET the second time,it shows the SF station, then press + or - to set the needed tempreture,finish the adjusting time,then press SET push botton return to the warming interface.

3.Put the clothes on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform)

4.When the time is up,the warning buzzers,then  put the handle back into place;

5.If the transfer paper is the hot one,pls tear it up at once;

   If the transfer paper is the cold one,pls tear it up after 10-15seconds.

Attention:

1.The whole machine must have the pretecting ground wire to keep safe;

2.The perfect transfer needs the right time,tempreture and press.Many factors will effect the transfer print,such as thickness of clothes,materials and the types of transfer paper.After transferring the trial,then can produce the large quatity.

Pictures Show:

Catalogue

Manual heat press machine

Swing heat press machine

Semi-atumatic heat press machine

Pneumatic heat press machine

Hydraulic heat press machine

Mug heat press machine

Cap heat press machine

Manual heat transfer machine/heat press large/heat transfer with CE 60*90